5 Easy Steps to Fix a Bissell Vacuum That Won’t Turn On

Are you dealing with the frustration of a Bissell vacuum that simply won’t power on? A malfunctioning vacuum can disrupt your cleaning routine and cause unnecessary stress. However, with the right guidance, troubleshooting the issue and getting your vacuum back to working order can be a straightforward process.

In this informative guide, we will walk you through 5 easy steps to fix a Bissell vacuum that won’t turn on. From simple checks and potential solutions to practical tips for maintaining your vacuum’s performance, this article aims to equip you with the knowledge and techniques needed to address this common problem efficiently. By following these steps, you can save time and money by avoiding the need for professional repairs and enjoy a fully functional Bissell vacuum once again.

Key Takeaways
First, make sure the vacuum is plugged in and the power switch is turned on. If it still won’t turn on, check the power cord for any damages and replace if necessary. If the power cord is fine, check the fuse or circuit breaker and reset if needed. If the issue persists, it may be a problem with the motor or internal wiring, and it’s best to contact Bissell customer support or take it to a professional for repair.

Check The Power Source

When your Bissell vacuum won’t turn on, the first step is to check the power source. Begin by ensuring that the vacuum is plugged into a functional power outlet. Sometimes, a loose or disconnected power cord may be the culprit behind the issue. Therefore, check the power cord connection to make sure it is secure. If the vacuum is cordless, ensure that the battery is fully charged or try replacing it with a new one if necessary.

In addition, inspect the power outlet by plugging in another appliance to confirm whether it is working properly. If the outlet seems to be the problem, reset the circuit breaker or replace any blown fuses. By thoroughly checking the power source, you can effectively troubleshoot and potentially resolve the issue of your Bissell vacuum not turning on, saving you time and hassle in the process.

Inspect The Power Cord

When troubleshooting a Bissell vacuum that won’t turn on, one of the first steps to take is inspecting the power cord. Begin by unplugging the vacuum from the power source and carefully examining the entire length of the cord for any visible damage such as cuts, fraying, or kinks. These issues can disrupt the flow of electricity and prevent the vacuum from turning on.

If any damage is found, the next step is to replace the power cord. Avoid using the vacuum with a damaged cord, as it can pose a safety hazard. You can find replacement cords at authorized Bissell dealers or directly from the manufacturer. It’s important to choose a cord that is compatible with your specific vacuum model to ensure proper functionality.

Additionally, check the connection points at both the vacuum and the power outlet for any loose or faulty connections. Make sure the cord is securely plugged in at both ends. Cleaning any debris or dust from the prongs and sockets can also help ensure a solid electrical connection. By thoroughly inspecting the power cord and its connections, you can effectively address this common issue and potentially resolve the problem of a Bissell vacuum that won’t turn on.

Examine The On/Off Switch

If your Bissell vacuum won’t turn on, one of the common culprits could be a malfunctioning on/off switch. Start by unplugging the vacuum and examining the on/off switch for any visible damage or debris. Sometimes, dust and dirt can accumulate around the switch, causing it to jam or stick. Use a small brush or compressed air to clean around the switch and remove any obstructions.

Next, check the wiring connected to the on/off switch for any fraying or damage. If you notice any issues with the wiring, you may need to replace the switch or the affected wires. Additionally, test the on/off switch to see if it is functioning properly by using a multimeter to check for continuity. If the switch does not show continuity when in the “on” position, it may need to be replaced to restore power to your Bissell vacuum.

By carefully examining and troubleshooting the on/off switch, you can determine whether it is the cause of your vacuum not turning on and take the necessary steps to fix the issue.

Clean The Vacuum’S Filters

To ensure that your Bissell vacuum functions properly, it is crucial to maintain and clean its filters regularly. Over time, dust, dirt, and debris can accumulate on the filters, leading to reduced suction power and potential overheating issues. To begin, carefully remove the filters from the vacuum according to the manufacturer’s instructions. Once removed, gently tap the filters over a trash bin to dislodge any loose dirt and debris.

Following the initial step, use a soft-bristled brush or a handheld vacuum with a brush attachment to thoroughly clean the filters. Ensure that all surfaces of the filters are effectively cleaned to restore optimal airflow and suction power. Additionally, consider washing the filters if they are washable and allowing them to air dry completely before reassembling them into your Bissell vacuum. By following these simple yet effective cleaning steps, you can help prolong the life of your Bissell vacuum and maintain its performance at its best.

Unclog The Vacuum

To unclog a Bissell vacuum, start by unplugging the machine and locating the clog. Check the hose, brush roll, and air path for any obstructions. Use a long, flexible object such as a broom handle or a plumbing snake to gently dislodge the clog. Avoid using sharp objects that could damage the vacuum parts.

For the hose, remove it from the vacuum and detach any accessories. Use the handle of a long spoon or a vacuum attachment to push the clog out. If the clog is in the brush roll, remove it from the vacuum and carefully cut away the hair, string, or debris with scissors.

Lastly, check the air path for any blockages. This could be located in the dirt container, filters, or other internal parts of the vacuum. Remove the dirt container and filters and clear out any debris. Reassemble the vacuum and test it to ensure it turns on and operates correctly. Regular maintenance and cleaning can help prevent future clogs, so it’s a good practice to inspect and clean the vacuum regularly.

Inspect The Brush Roll

When your Bissell vacuum won’t turn on, inspecting the brush roll is a crucial step in diagnosing the issue. The brush roll, also known as the beater bar, is responsible for agitating the carpet fibers and lifting the dirt and debris into the vacuum. Over time, the brush roll may become clogged with hair, string, or other debris, causing it to jam and prevent the vacuum from turning on.

To inspect the brush roll, start by unplugging the vacuum and flipping it over to access the underside. Locate the brush roll and carefully remove any visible debris wrapped around it. Use scissors or a seam ripper to cut away any tangled hair or fibers, being mindful not to damage the bristles of the brush roll. Once the brush roll is clear of debris, manually spin it to ensure it moves freely without any obstructions.

If the brush roll appears clean and spins freely, but the vacuum still won’t turn on, the issue may lie elsewhere in the machine. In this case, it’s recommended to proceed with the next steps for further troubleshooting.

Test The Motor

To test the motor of your Bissell vacuum, start by unplugging the vacuum and verifying that the power switch is in the “off” position. Then, open the vacuum’s casing to access the motor. Carefully inspect the motor and its connections for any visible signs of damage, such as frayed wires or burnt components. Use a multimeter to check if the motor is receiving the proper voltage. If the multimeter indicates that the motor is not getting power, the issue might be with the vacuum’s wiring or power supply.

If the motor is getting the correct voltage but still not turning on, it may be faulty and need replacement. Before replacing the motor, check if it is clogged with debris or obstructed in any way. Clearing any blockages and ensuring that the motor spins freely can sometimes resolve the issue. If none of these steps resolve the problem, it’s advisable to consult a professional technician or contact Bissell customer support for further assistance.

Contact Bissell Customer Support

If you have tried all the troubleshooting steps and your Bissell vacuum still won’t turn on, it may be time to reach out to Bissell customer support. Bissell customer support representatives are knowledgeable about their products and can provide guidance on the next steps to take. They can assist you in diagnosing the issue and may offer solutions that you have not yet considered.

When contacting Bissell customer support, be prepared to provide them with the model and serial number of your vacuum, as well as a detailed description of the problem you are experiencing. This will help them better understand your situation and provide more accurate assistance. Additionally, be ready to follow any instructions they provide for further troubleshooting or possible warranty-related solutions.

By reaching out to Bissell customer support, you can benefit from their expertise and potentially find a resolution to the issue preventing your vacuum from turning on. Their support team is dedicated to helping customers and can offer personalized assistance to address your specific concern.

Conclusion

In today’s fast-paced world, a malfunctioning vacuum can disrupt the flow of our daily routine. However, with the right tools and knowledge, fixing a Bissell vacuum that won’t turn on can be a manageable task for anyone. By following the 5 easy steps outlined in this article, users can save time and money by avoiding the need for professional repairs or replacement. Empowering yourself with the ability to troubleshoot and fix common issues with your Bissell vacuum not only saves resources but also extends the lifespan of your appliance, contributing to a more sustainable approach to household maintenance.

Remember, regular maintenance and timely troubleshooting are key to ensuring the longevity and efficiency of your Bissell vacuum. By implementing these easy steps, users can take control of their vacuum’s functionality and enjoy a cleaner, more efficient home environment. With a little bit of knowledge and effort, a non-functional vacuum can swiftly be transformed back into a reliable cleaning tool, ready to tackle everyday messes with ease.

Leave a Comment